How to print a template at actual size
Updated 5 November 2026
A box template folds up right only at 100%. Printed at 94%, a box 80 mm wide comes out a little over 75 mm and its flaps miss their tabs. The usual causes are a setting in the print dialog and a PDF made for one sheet printed on another.
Choose Actual size in the print dialog
In Adobe Acrobat Reader, open File, then Print, and look under Page Sizing & Handling. Fit reduces or enlarges each page to the printable area of the paper, Shrink oversized pages only ever makes a page smaller, and Custom Scale uses the percentage you type. Actual size prints without scaling. Choose Actual size, or Custom Scale at 100.
A PDF opened in a web browser goes through the browser's own print dialog, with its own scale setting. Open More settings if it is folded away and set the scale to 100, or to Actual size where it is offered.
Print on the sheet the PDF was made for
Each PDF here is drawn at the size of the sheet you picked in the tool. A4 is 210 × 297 mm and US Letter is 215.9 × 279.4 mm, or 8.5 × 11 in, so Letter is 5.9 mm wider and 17.6 mm shorter. An A4 page sent to Letter paper is 17.6 mm too tall, so the printer either crops the bottom or fits the whole page, which brings it down to 94%. A Letter page on A4 paper is 5.9 mm too wide, and fitting it brings it down to 97%.
Pick the sheet that is in your printer before you download. If the paper in the tray changes, download the template again for it.
Leave the edges to the template
Home printers cannot print right to the edge of the sheet. The tool keeps 6 mm clear on every side, or the margin you set in Settings, so no line falls where the printer cannot reach. Leave borderless printing off for templates: printing to the edge can mean the printer enlarges the page a little, and the box changes size with it.
Check the print with a ruler before you cut
Under More options, Add to the print, turn on the scale bar. It prints a bar 1 in or 25 mm long with the legend. Lay a ruler along it: if the bar measures 25 mm, the sheet printed at the right scale. Without the bar, measure one wall panel and compare it with the size on screen.
A 1 mm difference across a 100 mm panel is 1%, close enough for a box that holds a gift. A difference of 3 mm or more means the page was scaled somewhere; print it again before you cut the card.
When the box comes out wrong
- Smaller all round: the page was fitted. Print again at Actual size.
- The bottom of the template is missing: the PDF was made for A4 and the printer has Letter, or the other way round. Download it again for the sheet you have.
- Right size but the lid is tight or loose: the walls are drawn for the paper chosen in the tool. See which cardstock to use and set the paper to match.
Make the template
More guides
- Which cardstock to use for a box: Start with 80 lb cover, which is 216 gsm. A chart of weights from 65 to 130 lb, with each sheet's thickness.
- Inside size, outside size and how to measure: Every size here is an inside size. Leave 2 or 3 mm a side and the walls go on the outside.
- All guides