How to score and fold cardstock

Updated 5 November 2026

Scoring presses a groove along each fold line before you bend it. On cardstock, a fold made without one wanders off the line and the surface cracks along it. You need a ruler and something blunt.

Score along a ruler first, and the panel folds on the groove.

What to score with

A scoring board, the back of a table knife against a ruler, a dotting tool and a ruler, or a bone folder. An empty ballpoint pen works too. Whatever you use must be blunt: the score should dent the surface of the card and leave its fibers whole.

Score first, then cut

The template prints solid lines to cut and dashed lines to fold. Score every dashed line while the sheet is still whole and flat. A ruler lies steady on a full sheet, and a narrow tab is less likely to tear when it is still part of it. Then cut the solid lines with a craft knife against a metal ruler, or with scissors for the curves.

How hard to press

Press along the full length of each dashed line in one steady stroke. The heavier the card, the deeper the groove needs to be. Before you score the template itself, try a line on a scrap of the same card and fold it: if the outside of the fold cracks or the crease drifts away from the groove, press harder.

Fold every crease before you glue

Bend each panel along its groove, then run a bone folder or a fingernail along the fold to set it. Crease every fold before any glue goes on, so the box finds its shape and the corners line up. Then glue one tab at a time and hold it until it grips. With Shade the glue flaps on, under More options, Lines, the tabs print shaded so you can see where the glue goes.

Keep the lines out of sight

If the dashed lines would show on the finished box, turn on Print the lines on the inside under More options, Lines. The template prints mirrored, so the lines end up inside the box. Colours and words are left off while it is on, since they print on the outside.

When a fold cracks

A crack along a fold usually means the score was too shallow or the fold crosses the grain of the card. Score deeper, fold more slowly, or choose a lighter card for small boxes: which cardstock to use lists the weights. On a cutting machine the score can be made for you: see cutting on a Cricut or Silhouette.

Make the template

Open the box template maker

More guides

Sources
  1. Cardstock Warehouse, Paper 101: Scoring, Folding and Paper Grain, read 2026-11-05: “Test the paper to find the grain by bending the paper part way, as if to fold it. Do this in each direction. … There is less resistance when the fold line runs with the grain … Prevents the paper from “cracking” along the fold line … Can be done with a scoring board, the back of a knife and a ruler, a dotting tool and a ruler, or with a tool called a “bone folder" … The score should not puncture or break the fibers on the surface of your paper, but simply make an impression … The heavier the paper, the deeper the depression will need to be. … Cardstock paper that feeds into the printer against the grain may result in difficulty feeding through the printer and paper jams”
  2. CutCardStock, Paper Weights Explained, read 2026-11-05: “Please note that 80# text weight is a paper weight and 80# Cover weight is a card stock … 65 lb Cover Weight/176 gsm card stock … 80 lb Cover Weight/ 216 gsm card stock is our most commonly used card stock. It is a medium weight card stock that will go through almost any type of printer. … If you are needing to fold the 80 lb cardstock, we would recommending scoring the stock before folding it. … 100 lb cover weight/270 gsm card stock … 110 lb cover weight/ 298 gsm card stock … The 80 lb text paper, equivalent to 118 gsm … 130 lb cover weight/352 gsm card stock is getting into what we classify as our heavyweight card stock. It is very important to check with your personal and professional printers to be certain that they can print on this heavy card stock.”